Device for samples preparation PT2110C

Device for samples preparation

PT2110C model

The device for samples preparation (the dry-bulb thermostat) PT2110C is intended for thermal stabilizing of cells with the researched liquid at temperature of 37C

Distinctive features

  • Prepares at the same time 9 samples
  • Increases productivity in case of the large volume of researches

Scope

It can be used as the additional equipment to the following devices:
  • PM2111 photometer
  • Spectrophotometer PV1251C
  • Automated photometer PA2600
  • Other devices using standard cells 12,5х12,5x45 mm
State registry SI of RB No. 03 25 0081 11
State registry SI of the Russian Federation No. 16361-12
State registry SI UKE of UA-MI/3p-219-2000
Nominal temperature of a termostating 37 °C
Limits of temperature ajustment from nominal rate not less than +-1 °C
Stability of maintenance of the set temperature +-0,1 °C
Time of operating mode access no more than 30 min.
Cells 9 pieces 12,5x12,5x45 mm
Dimensions 75x80x190 mm
Weight 1,5 kg
Energy consumption 230 (+- 10%) V, 50 Hz, 35 VA
№ 10031
№ 10032
№ 10033
№ Cell type Length of optical way , mm Spectral range, mm Internal sizes, mm Packing, pc
10031 Polystyrene one use MACRO cells 10 From 34 nm 10х10х44 100
10032 Polystryrene one use SEMI MICRO cells 10 From 34 nm 10х4х44 100
10033 Glass cells 10 From 34 nm 10х10х43 1
Share